Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R448a Refrigerant, 5 Lb., Replacement R404a & R22 Commercial
Refrigeration KIT
We have the best price on ebay ON THIS refrigerant R448a.
(1) 5 Lb. Tank of Refrigerant R-448a
(1) 36″ Charging Hose
(1) Envirosafe PSXL4 System Sealer Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
R448a Refrigerant, 5 Lb., Replacement R404a & R22 Commercial
Refrigeration Applications
Refrigerant  R-448a, Factory Sealed 5 Lb. Tank.
5 Lb Tank
New and factory Sealed
The #1 choice and replacement R404a & R22 Commercial Refrigeration Applications, low and medium temperature applications.
Can hose connection: 1/4″ male flare
.
Description
The move to R448A, an HFO blend refrigerant follows its extensive testing by Precision over the last two years.
R404A is the market’s standard refrigerant for freezers and blast chillers but, with its high GWP of 3,922, it is one of the main refrigerants targeted for phase-out in both Europe and the US.
R448A is a blend of the HFCs R32 (26%), R125 (26%) and R134a (21%), with HFO components R1234yf (20%) and 1234ze(E) (7%). Its GWP is around 1300 and is classified A1 by ASHRAE – non-toxic and non-flammable.
According to the results of tests carried out by Precision, it is also more energy efficient than R404A.
Now there is a viable alternative, it makes no sense to use R404A..
A average of 4% energy saving on the cabinets we have tested so far, the biggest gains coming from blast chiller applications.
R404A’s very high GWP!
R448A is an azeotropic mixture, which is classified as a non-flammable replacement refrigerant with a low GWP value.  It was designed to serve as a replacement for R404A (and R22) in low and medium temperature systems, such as refrigeration solutions in supermarkets and vending machines connected to the power grid and so on.
R448A REFRIGERANT APPLICATIONS, USE AND REPLACEMENT REFRIGERANTS
R448A is a suitable replacement gas for R404A systems.
It can be used in new installations and as a direct replacement gas in existing systems.
The GWP drops significantly from 3920 to 1386. In contexts where the evaporation temperature is low, cooling power drops 10–15% but efficiency is improved.
Since there is some variation in capacity and power, this must always be considered with regard to handling, application and retrofitting.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a “Hazardous Materials Package” with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including “ORMD” Limited Quantities Exemption shipments.
We have the best price on ebay ON THIS refrigerant R448a. (1) 5 Lb. Tank of Refrigerant R-448a (1) 36″ Charging Hose (1) Envirosafe PSXL4 System Sealer Injector *This will screw onto the suction service port (Larger Line). Connect the charging hose coming from the refrigerant can to the injector. Added the refrigerant that will push the product in as need to fully charge the system. Envirosafe PSXL4 Injector One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. —Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. —ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. —Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints —Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. —If there is still Proseal XL4 in the system it will reseal the schrader. —This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. —Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils —DO NOT use in ammonia systems —One-time use —Concentrated —No need to pump-down R410 or other units —No injection-hose or caulk-gun needed —Concentrated formula means less material in the system R448a Refrigerant, 5 Lb., Replacement R404a & R22 Commercial Refrigeration Applications Refrigerant R-448a, Factory Sealed 5 Lb. Tank. 5 Lb Tank New and factory Sealed The #1 choice and replacement R404a & R22 Commercial Refrigeration Applications, low and medium temperature applications. Can hose connection: 1/4″ male flare. Description The move to R448A, an HFO blend refrigerant follows its extensive testing by Precision over the last two years. R404A is the market’s standard refrigerant for freezers and blast chillers but, with its high GWP of 3,922, it is one of the main refrigerants targeted for phase-out in both Europe and the US. R448A is a blend of the HFCs R32 (26%), R125 (26%) and R134a (21%), with HFO components R1234yf (20%) and 1234ze(E) (7%). Its GWP is around 1300 and is classified A1 by ASHRAE – non-toxic and non-flammable. According to the results of tests carried out by Precision, it is also more energy efficient than R404A. Now there is a viable alternative, it makes no sense to use R404A.. A average of 4% energy saving on the cabinets we have tested so far, the biggest gains coming from blast chiller applications. R404A’s very high GWP! R448A is an azeotropic mixture, which is classified as a non-flammable replacement refrigerant with a low GWP value. It was designed to serve as a replacement for R404A (and R22) in low and medium temperature systems, such as refrigeration solutions in supermarkets and vending machines connected to the power grid and so on. R448A REFRIGERANT APPLICATIONS, USE AND REPLACEMENT REFRIGERANTS R448A is a suitable replacement gas for R404A systems. It can be used in new installations and as a direct replacement gas in existing systems. The GWP drops significantly from 3920 to 1386. In contexts where the evaporation temperature is low, cooling power drops 10–15% but efficiency is improved. Since there is some variation in capacity and power, this must always be considered with regard to handling, application and retrofitting.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R448a Refrigerant, 5 Lb., Replacement R404a & R22 Commercial
Refrigeration KIT
We have the best price on ebay ON THIS refrigerant R448a.
(1) 5 Lb. Tank of Refrigerant R-448a
(1) 36″ Charging Hose
(1) Envirosafe PSXL4 System Sealer Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
R448a Refrigerant, 5 Lb., Replacement R404a & R22 Commercial
Refrigeration Applications
Refrigerant  R-448a, Factory Sealed 5 Lb. Tank.
5 Lb Tank
New and factory Sealed
The #1 choice and replacement R404a & R22 Commercial Refrigeration Applications, low and medium temperature applications.
Can hose connection: 1/4″ male flare
.
Description
The move to R448A, an HFO blend refrigerant follows its extensive testing by Precision over the last two years.
R404A is the market’s standard refrigerant for freezers and blast chillers but, with its high GWP of 3,922, it is one of the main refrigerants targeted for phase-out in both Europe and the US.
R448A is a blend of the HFCs R32 (26%), R125 (26%) and R134a (21%), with HFO components R1234yf (20%) and 1234ze(E) (7%). Its GWP is around 1300 and is classified A1 by ASHRAE – non-toxic and non-flammable.
According to the results of tests carried out by Precision, it is also more energy efficient than R404A.
Now there is a viable alternative, it makes no sense to use R404A..
A average of 4% energy saving on the cabinets we have tested so far, the biggest gains coming from blast chiller applications.
R404A’s very high GWP!
R448A is an azeotropic mixture, which is classified as a non-flammable replacement refrigerant with a low GWP value.  It was designed to serve as a replacement for R404A (and R22) in low and medium temperature systems, such as refrigeration solutions in supermarkets and vending machines connected to the power grid and so on.
R448A REFRIGERANT APPLICATIONS, USE AND REPLACEMENT REFRIGERANTS
R448A is a suitable replacement gas for R404A systems.
It can be used in new installations and as a direct replacement gas in existing systems.
The GWP drops significantly from 3920 to 1386. In contexts where the evaporation temperature is low, cooling power drops 10–15% but efficiency is improved.
Since there is some variation in capacity and power, this must always be considered with regard to handling, application and retrofitting.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a “Hazardous Materials Package” with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including “ORMD” Limited Quantities Exemption shipments.
We have the best price on ebay ON THIS refrigerant R448a.
(1) 5 Lb. Tank of Refrigerant R-448a
(1) 36″ Charging Hose
(1) Envirosafe PSXL4 System Sealer Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
R448a Refrigerant, 5 Lb., Replacement R404a & R22 Commercial
Refrigeration Applications
Refrigerant  R-448a, Factory Sealed 5 Lb. Tank.
5 Lb Tank
New and factory Sealed
The #1 choice and replacement R404a & R22 Commercial Refrigeration Applications, low and medium temperature applications.
Can hose connection: 1/4″ male flare
.
Description
The move to R448A, an HFO blend refrigerant follows its extensive testing by Precision over the last two years.
R404A is the market’s standard refrigerant for freezers and blast chillers but, with its high GWP of 3,922, it is one of the main refrigerants targeted for phase-out in both Europe and the US.
R448A is a blend of the HFCs R32 (26%), R125 (26%) and R134a (21%), with HFO components R1234yf (20%) and 1234ze(E) (7%). Its GWP is around 1300 and is classified A1 by ASHRAE – non-toxic and non-flammable.
According to the results of tests carried out by Precision, it is also more energy efficient than R404A.
Now there is a viable alternative, it makes no sense to use R404A..
A average of 4% energy saving on the cabinets we have tested so far, the biggest gains coming from blast chiller applications.
R404A’s very high GWP!
R448A is an azeotropic mixture, which is classified as a non-flammable replacement refrigerant with a low GWP value.  It was designed to serve as a replacement for R404A (and R22) in low and medium temperature systems, such as refrigeration solutions in supermarkets and vending machines connected to the power grid and so on.
R448A REFRIGERANT APPLICATIONS, USE AND REPLACEMENT REFRIGERANTS
R448A is a suitable replacement gas for R404A systems.
It can be used in new installations and as a direct replacement gas in existing systems.
The GWP drops significantly from 3920 to 1386. In contexts where the evaporation temperature is low, cooling power drops 10–15% but efficiency is improved.
Since there is some variation in capacity and power, this must always be considered with regard to handling, application and retrofitting.